Covering the interior of the shower with wallpapers

Fiberglass cloth can be used to decorate living spaces and also for putting up walls in the bathroom. Because of their water-repellent properties, and resistance to hot steam, glass wallpaper in bathrooms holds well. They can be painted and last a long time. The fiberglass canvas also prevents mold growth. Selecting a special glue is important to ensure that the material lasts longer on walls and ceilings. Glasvezelbehang, Oscar Lakra & Nortex are the main producers of ready-to use products. Average glue consumption is 1 liter for every 5-6 sq. m. wallpaper.

After choosing the right finishing material and solution, you need to decide how to glue fiberglass. Although the technology is similar to ordinary pasting, it does have its own unique nuances. The adhesive mixture is applied directly to the surface, not to the sheet. The wallpaper is glued from end to end. If the wallpaper has a pattern, it is best to allow for 5 cm when measuring. The excess glue is removed after glueing. You can have a vertical or horizontal joint. See examples of glass wallpapers for painting here.

The wallpaper is painted twice, with a 12-hour interval between each. You must control how much glue and paint you use. A layer too thick of glue or paint can cause separation from the ceiling or wall. The reviews from people who have done this type of finishing work provide more information about glass wallpaper for painting.

First, the manufacturer. Second, the relevance of the fiberglass collection. Density of the material can also influence the cost. The higher the raw materials used, the more expensive the final product. Glass wallpaper is generally considered a mid-range floor covering. It rarely costs more that twenty dollars per roll.

You will need to have a ladder or stable table to help you apply the adhesive to your ceiling. Proper surface preparation is crucial before you begin gluing. This includes leveling, filler, and primer. You will also benefit from the assistance of another person, who can hold a fiberglass sheet and provide it to you while you glue. You will feel uncomfortable and the material could be stained or damaged.

It is possible to cover the part of the bathroom not exposed to water with fiberglass. It is best to not glue wallpaper directly on the wall where the bathtub is located. They can easily peel off, despite their water resistance. It is a good idea to decorate the bathroom interior with fiberglass. Their indisputable benefit is that they can match tiles and furniture, and can be repainted if necessary. To update the bathroom’s interior, it would be necessary to remove tiles from the entire wall.

Although theoretically it is possible, the wall must be prepared properly in order to make it happen. Special compounds are available to improve adhesion on such surfaces. These compounds act as primers and can be applied multiple times at the intervals that are necessary for the previous coat of paint to dry completely. This is a common question for anyone who intends to glue fiberglass to the walls of the kitchen or bathroom. These rooms are often painted with oil paint prior to renovations in an apartment. Even in these cases, proper preparation will ensure that the glass wallpaper sticks reliably.

Leave a Reply

Your email address will not be published. Required fields are marked *